4. Series 8 IOTA Pinouts
4.4. TC/RTD IOTA
Models 8X-TAIMA1
R500 Series 8 I/O User's Guide 81
April 2017 Honeywell
connector block assembly, and
fuses
Associated with this board and module, refer to TC/RTD in the Recommended Spare
Parts section.
Field wiring and module protection
The following apply to fusing for TC/RTD.
Power to module electronics
FUSE, 1 Amp, 125V,
Quick Blo, 5x20mm
Fuses 1
The primary purpose of the main electronics fuse (F1), is to protect the module
electronics.
IOTA board and connections
Series 8 TC/RTD 9 inch, non-redundant IOTA is illustrated in the following figure.
To Next Page
Loading...
