Honeywell Series 8 I/O - Unassigning an IOC Block from an IOM; IOC Block Unassignment

6. Series 8 I/O Configuration
6.5. Unassigning an IOC block from an IOM
168 Series 8 I/O User's Guide R500
Honeywell April 2017
Step
Action
Result
IOM.
assignment.
4
Click Assign.
Assigns the selected
IOC block.
5
Click the dialog close button to complete the
assignment.
Confirmation dialog
box appears.
6
Click Yes to accept the changes.
Function Block
Assignment Dialog
box closes.
6.5 Unassigning an IOC block from an IOM
IOC block unassignment
An IOC function block can be unassigned from an IOM. Unassigned IO channels are
available for reassigning only after the CM is saved.
Prerequisites
 IOC blocks cannot be unassigned if the IOC currently exists in the Monitoring tree.