Honeywell Series 8 I/O - Determining the Digital Input channel properties or DIGITAL INPUT PULSE ACCUMULATION channel properties

6. Series 8 I/O Configuration
6.11. Defining DIGITAL INPUT PULSE ACCUMULATION Channel Blocks
200 Series 8 I/O User's Guide R500
Honeywell April 2017
Figure 59 DIGITAL INPUT PULSE ACCUMULATION conversion
Determining the Digital Input channel properties or DIGITAL INPUT PULSE
ACCUMULATION channel properties
For the Digital Input Channel, the point type (PNTTYPE) is Digital Input. For more
information regarding the Digital Input channel block, refer to the section Defining
Digital Input Channel Blocks.
For the DIGITAL INPUT PULSE ACCUMULATION Channel, the point type
(PNTTYPE) is DIGITAL INPUT PULSE ACCUMULATION. The AVRAW parameter
represents the raw count of pulses at input screws for the DIGITAL INPUT PULSE
ACCUMULATION point type. The AVRAW is available as an input to logic blocks like
Totalizer or Data acquisition and other Experion control functions blocks.