Honeywell Series 8 I/O - Table 34 HART Device Status Tab Parameters; Figure 44 HART Device Status Tab

5. Series 8 I/O Configuration Form Reference
5.20. Configuring HART Identification tab - Channel block
R500 Series 8 I/O User's Guide 145
April 2017 Honeywell
Figure 44 HART Device Status tab
Table 34 HART Device Status tab parameters
Plain text
Parameter name
User configurable
Communication Status
HART Communication Status
HCOMSTS
No
Last Communication Failure
HCOMFAIL
No
Failed Command
HCMDFAIL
No