Honeywell Series 8 I/O - 5.12 Configuring Server Displays Tab - IOM Block; Configuring Modules - Server Displays Tab

5. Series 8 I/O Configuration Form Reference
5.12. Configuring Server Displays tab - IOM block
R500 Series 8 I/O User's Guide 125
April 2017 Honeywell
Plain text
Parameter name
User
configurable
Notes
Create New or
Edit Existing
Server Scripts
(Button)
N/A
Launch the Server scripting
configuration utility.
5.12 Configuring Server Displays tab - IOM block
Configuring modules - Server Displays tab
The following configuration information pertains to the Server Displays Failure tab for
the following modules:
 ANALOG INPUT WITH HART
 ANALOG INPUT
 TC/RTD
 Analog Output
 ANALOG OUTPUT WITH HART
 DIGITAL INPUT 24VDC
 DIGITAL INPUT SEQUENCE OF EVENTS
 DIGITAL OUTPUT 24VDC
 DIGITAL INPUT PULSE ACCUMULATION
Prerequisites
 Control Builder is running
 A Series 8 I/O control module was created
Considerations
 All illustrations used in the procedure are for example purposes only.
The following is an example of a DIGITAL OUTPUT 24VDC Block, Configuration
form - Server Displays tab.