Honeywell Series 8 I/O - Wrong_Hw; Dtpathfl; Dtpathto; Pifaulty

13. Series 8 I/O Alarms and Failures
13.2. Reviewing IOM soft failures
280 Series 8 I/O User's Guide R500
Honeywell April 2017
63 WRONG_HW
IO redundancy configured on non-supportive hardware rev.
Diagnostic check:
Cause:
IO redundancy configured on non-supportive hardware rev
Solution:
69 DTPATHFL
Data path failure.
Diagnostic check:
Cause:
Data path failure
Solution:
70 DTPATHTO
Data path time out.
Diagnostic check:
Cause:
Data path time out
Solution:
72 PIFAULTY
Bad personality image.
Diagnostic check:
Cause:
Bad personality image
Solution: