Honeywell Series 8 I/O - Table 33 HART Configuration Tab Parameters; Figure 43 HART Configuration Tab

5. Series 8 I/O Configuration Form Reference
5.18. Configuring HART Configuration tab - Channel block
142 Series 8 I/O User's Guide R500
Honeywell April 2017
Figure 43 HART Configuration tab
Table 33 HART Configuration tab parameters
Plain text
Parameter name
User configurable
General configuration
Enable HART
HENABLE
Yes
Enable HART Alarms and Events
HALARMENABLE
Yes
Configured HART Device
HCFGDEV
Yes