Honeywell Series 8 I/O - Figure 37 Server Display Tab

5. Series 8 I/O Configuration Form Reference
5.12. Configuring Server Displays tab - IOM block
126 Series 8 I/O User's Guide R500
Honeywell April 2017
Figure 37 Server Display tab
To configure the Server Displays tab, perform the following steps.
Step
Action
1
Under the Server Displays tab, enter the appropriate information to specify
related Point Detail Display, Group Detail Display, and Associated
Display along with values for appropriate parameters to define Trends and
Groups for display. If necessary, press F1 to access online help for
assistance during this step
2
Click OK on the configuration form to accept all configuration selections made
on each configuration tab and to return to the Project tree.