7. Series 8 I/O Operations
7.12. Enabling the configuration in Digital Input Pulse Accumulation channel
R500 Series 8 I/O User's Guide 225
April 2017 Honeywell
7.12 Enabling the configuration in Digital Input Pulse
Accumulation channel
The following configuration information pertains to Digital Input Pulse Accumulation
channel in which Digital Input is selected as the point type.
Prerequisites
Control Builder is running
Point type is selected as Digital Input.
Considerations
All illustrations used in the procedure are for example purposes only.
The following is an example of Digital Input Pulse Accumulation channel in which the
Digital Input is selected as the point type.
To Next Page
Loading...
