Honeywell Series 8 I/O - 7.3 Series 8 I;O LED Descriptions

7. Series 8 I/O Operations
7.3. Series 8 I/O LED Descriptions
R500 Series 8 I/O User's Guide 209
April 2017 Honeywell
If Icon is . . .
Then ICONSTAE parameter value is . . .
green
Active
yellow/HART
Database is invalid and HART is enabled
red/HART
Error and HART is enabled
blue/HART
Inactive and HART is enabled
green/HART
Active and HART is enabled
7.3 Series 8 I/O LED Descriptions
The following figure and table identify and describe the LED indicators on the IOM.