Honeywell Series 8 I/O - Supported Series 8 I;O Modules; Available Series 8 I;O Modules; Table 4 Available I;O Modules

2. Series 8 I/O Planning and Design
2.4. Supported Series 8 I/O modules
30 Series 8 I/O User's Guide R500
Honeywell April 2017
2.4 Supported Series 8 I/O modules
Available Series 8 I/O modules
The list of I/O modules below can be used on a Series 8 IOLINK. The IOLINK contains
a function that enables programming and reprogramming the executable image (rather
than substitution of a removable hardware component). The preferred method of delivery
of the image is over the IOLINK.
TIP
C300 IOLINK block parameter IOLINKTYPE is used to determine if the
IOLINK supports Series 8 I/O.
Table 4 Available I/O modules
IOM model
names
IOM block
name
Description
# of
channels
8C-PAIHA1
8U-PAIHA1
ANALOG
INPUT WITH
HART
Analog Input with HART- Single Ended
16
8C-PAIH54
8U-PAIH54
ANALOG
INPUT WITH
HART
Analog Input with HART - Differential
16
8C-PAINA1
8U-PAINA1
ANALOG
INPUT
Analog Input – Single Ended
16
8C-PAONA1
8U-PAONA1
Analog Output
Analog Output
16
8C-PAOHA1
8U-PAOHA1
Analog Output
Analog Output with HART
16
8U-PAIMA1
8C-PAIMA1
TC/RTD
TC/RTD input
16
8U-PDILA1
8C-PDILA1
DIGITAL
INPUT 24VDC
Digital Input (24 volts DC)
32