Honeywell Series 8 I/O User Manual

R500 Series 8 I/O User's Guide iii
April 2017 Honeywell
About This Document
The procedures in this document are intended to give you the ability to perform basic
tasks with the Series 8 I/O such as configuring hardware devices, continuous control
strategies. Respective forms are shown to illustrate a procedure/concept only.
Release Information-
Document Name
Document ID
Release
Number
Publication
Date
Series 8 I/O User's Guide
EXDOC-
X110-en-
500A
500
April 2017
Intended audience
This guide is intended for the following users:
 Persons responsible for system planning, initial hardware installation, and control
strategy configuration.
 Operators who help to maintain control system operations on a day-by-day basis.
 Service persons responsible for routine maintenance of control hardware, and who
also diagnose and repair faults.
Prerequisite Skills
It is assumed that you should have some knowledge of Experion control systems and
experience of working in a Microsoft Windows environment.

Honeywell Series 8 I/O Specifications

General

Brand	Honeywell
Model	Series 8 I/O
Category	I/O Systems
Language	English