Testing power supply
Before replacing the power supply, use the Built-In Self-Test (BIST) feature to learn if the power supply
still works.
To test the power supply:
1. Unplug the AC power.
2. Disconnect all internal power supply cables from the system board.
3. Plug in AC power.
●
If the green BIST LED (illustrated below) on the rear of the workstation is illuminated and the
fan is spinning, the power supply is functional.
●
If the green BIST LED is not illuminated or the fan is not spinning, replace the power supply.
Figure 5-1 Testing power supply with BIST LED
Table 5-3 Power supply problems
Problem Cause Solution
Power supply shuts down
intermittently.
Power supply fault. Replace the power supply.
ENWW Customer Self Help 115
To Next Page
Loading...
