HP xw4600 User Manual

mode selected. To manually switch to POST Messages Enabled during POST, press any key
except F1 through F12.
●
Establish an Ownership Tag, the text of which is displayed each time the system is powered on or
restarted.
●
Enter the Asset Tag or property identification number assigned by your company to this
workstation.
●
Enable power-on password prompts during system restarts (warm-boots) and power on.
●
Hide or show the integrated I/O functionality, including serial, USB, or parallel ports, audio, or
embedded NIC. Any hidden devices are inaccessible which increases overall system security.
●
Enable or disable removable media boot ability.
●
Enable or disable removable media write ability (if supported by hardware).
●
Replicate your system setup by saving system configuration information on CD or diskette and
restoring it on one or more workstations.
●
Execute self-tests on specified SATA and SAS hard drives (if supported by the drive).
BIOS ROM
The BIOS ROM is a collection of machine language programs stored as firmware in ROM. It includes
functions such as POST, PCI device initialization, Plug and Play support, power management, and the
Computer Setup (F10) Utility. The BIOS ROM is a 1-MB Serial Peripheral Interface (SPI) port. The
firmware contained in the BIOS ROM supports the following systems and specifications:
●
Microsoft Windows Hardware Quality Labs (WHQL)
●
Alert-On-LAN (AOL) and Wake-On-LAN (WOL)
●
Advanced Configuration and Power Interface (ACPI) 1.0 and OnNow
●
System Management BIOS (SMBIOS) 2.3.5
●
PC98/99/00 and NetPC
●
Preboot Execution Environment (PXE) boot ROM for the integrated LAN controller
●
BIOS Boot Specification 1.01
●
Enhanced Disk Drive Specification 3.0
●
“El Torito” Bootable CD Format Specification 1.0
●
AT Attachment Packet Interface (ATAPI) Removable Media Device BIOS Specification 1.0
●
Multiprocessor Specification (MPS) 1.4 (for booting Linux SMP)
Using the Computer Setup (F10) Utility
You can only open the Computer Setup (F10) Utility by powering on or restarting the workstation.
28 Chapter 3 System management ENWW

HP xw4600 Specifications

General

Tcase	72.4 °C
Bus type	FSB
Stepping	E0
Processor cache	6 MB
Processor cores	2
Processor model	E8400
System bus rate	- GT/s
Processor family	Intel® Core™2 Duo
Processor series	Intel Core 2 Duo E8000 Series
Processor socket	LGA 775 (Socket T)
Processor codename	Wolfdale
Processing Die size	107 mm²
Processor frequency	3 GHz
Processor cache type	L2
Processor lithography	45 nm
Processor manufacturer	Intel
Processor front side bus	1333 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	65 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	9
Number of Processing Die Transistors	410 M
Audio system	High Definition Audio
Product type	Workstation
Motherboard chipset	Intel® X38 Express
ECC	Yes
Internal memory	2 GB
Memory clock speed	800 MHz
Internal memory type	DDR2-SDRAM
Maximum internal memory	8 GB
Memory layout (slots x size)	2 x 1 GB
HDD speed	7200 RPM
HDD capacity	250 GB
HDD interface	SATA
Optical drive type	DVD-RW
Graphics card	-
Networking features	Gigabit Ethernet (10/100/1000)
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power supply	475 W
Chassis type	Tower
Country of origin	China
Processor code	SLB9J
Processor ARK ID	33910
Processor package size	37.5 x 37.5 mm
On-board graphics card model	Not available

Weight and Dimensions

Depth	456 mm
Width	168 mm
Height	450 mm
Weight	19000 g