EasyManuals Logo

HP xw4600 User Manual

HP xw4600
176 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
Architecture—Displays the workstation bus type and BIOS information. In addition, if the bus is PCI,
information about the PCI configuration is displayed.
Asset Control—Displays the serial number of the computer and also provides processor information.
Communication—Displays information about the computer parallel (LPT) and serial (COM) port
settings, USB, and network controller information.
Graphics—Displays information about the graphics subsystem of the computer.
Input Devices—Displays information about the type of keyboard and mouse.
Memory—Displays information about all memory in the computer, including memory on the board and
any memory modules installed.
Miscellaneous—Displays information obtained from the computers configuration memory (CMOS),
BIOS data area, Interrupt Vector table, and diagnostics component information.
Storage—Displays information about storage media connected to the computer, including all fixed
disks, diskette drives, and optical drives.
System—Displays product type, processor type and speed, coprocessor information, and information
about all ROMs in the computer.
Test tab
The Insight Diagnostics utility provides the capability to test all the major hardware components in the
workstation. You can select from several types of tests:
Quick Test—Provides a predetermined script that samples most hardware components and requires
no user intervention.
Complete Test—Provides a predetermined script during which most hardware components are fully
tested. You can select Interactive or Unattended tests. This changes the devices tested during the
Complete Test. More tests are available in the interactive mode, but these require user intervention.
Custom Test—Provides the most flexibility in controlling the testing of a system. The Custom Test mode
enables you to specifically select which devices, tests, and test parameters to run. You can select tests
that do not require any user interaction through the Interactive and Unattended test modes. More tests
are available in the interactive mode, but these tests require user intervention.
To begin diagnostics testing:
1. Select the Test tab.
2. Select Type of Test to perform, select Test Mode, and then select either Interactive or
Unattended.
3. Choose how you want the test to be executed, either Number of Loops or Total Test Time.
When choosing to run the test over a specified number of loops, enter the number of loops to
perform.
If you want to run the diagnostic test for a specified time period, enter the amount of time in
minutes.
4. To start the test, select Begin Testing in the lower right corner of the display.
ENWW HP Insight Diagnostics Offline Edition 133

Table of Contents

Other manuals for HP xw4600

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP xw4600 and is the answer not in the manual?

HP xw4600 Specifications

General IconGeneral
Tcase72.4 °C
Bus typeFSB
SteppingE0
Processor cache6 MB
Processor cores2
Processor modelE8400
System bus rate- GT/s
Processor familyIntel® Core™2 Duo
Processor seriesIntel Core 2 Duo E8000 Series
Processor socketLGA 775 (Socket T)
Processor codenameWolfdale
Processing Die size107 mm²
Processor frequency3 GHz
Processor cache typeL2
Processor lithography45 nm
Processor manufacturerIntel
Processor front side bus1333 MHz
Processor operating modes64-bit
ECC supported by processorNo
Thermal Design Power (TDP)65 W
Number of processors installed1
CPU multiplier (bus/core ratio)9
Number of Processing Die Transistors410 M
Audio systemHigh Definition Audio
Product typeWorkstation
Motherboard chipsetIntel® X38 Express
ECCYes
Internal memory2 GB
Memory clock speed800 MHz
Internal memory typeDDR2-SDRAM
Maximum internal memory8 GB
Memory layout (slots x size)2 x 1 GB
HDD speed7200 RPM
HDD capacity250 GB
HDD interfaceSATA
Optical drive typeDVD-RW
Graphics card-
Networking featuresGigabit Ethernet (10/100/1000)
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power supply475 W
Chassis typeTower
Country of originChina
Processor codeSLB9J
Processor ARK ID33910
Processor package size37.5 x 37.5 mm
On-board graphics card modelNot available
Weight and Dimensions IconWeight and Dimensions
Depth456 mm
Width168 mm
Height450 mm
Weight19000 g

Related product manuals