HP xw4600 User Manual

To configure a two-disk mirrored volume with an optional hot spare disk:
●
In the RAID Properties screen, use the arrow keys to select the primary disk for the IM volume
(the disk with the data you want to mirror.)
●
Use the arrow keys to move to the Array Disk column for this disk and use the SPACE key to
select Yes as the value. If partitions are defined on the selected disk, a message appears
warning you that data on the disk will be lost when the striped volume is created. Press the
M key to migrate, or the D key to delete the data on the drive.
●
When the Keep Data/Erase Disk message appears, press F3 to keep the data currently on
this disk. The value in the Array Disk column changes to Primary.
●
Use the arrow keys to select the secondary (mirrored) disk for the IM volume. Select Yes as
the value for the Array Disk column.
If partitions are defined on this disk, a message warns you that data on the disk will be lost
when the mirrored volume is created. Press Delete to confirm erasing data from the disk, or
press any other key to deselect the disk. Continue with Step 6.
SAS RAID 1E configuration
Follow the steps below to configure an Integrated Mirroring Extended (IME) volume with the BIOS-based
configuration utility. The configuration procedure assumes that the system already has the required disk
and disk controllers.
1. On the Main menu screen of the BIOS-based configuration utility, use the arrow keys to select an
adapter.
2. Press Enter to go to the Adapter Properties screen.
3. On the Adapter Properties screen use the arrow keys to select RAID Properties on the screen.
4. Press Enter to go to the RAID Properties screen. Continue with Step 5 to configure a two-disk
mirrored volume. Go to Step 6 to configure a mirrored volume with three to six disks.
5. To configure a mirrored volume with three to six disks, or three to five disks with an optional hot
spare disk:
●
In the RAID Properties screen, use the arrow keys to select the first disk for the IME volume.
●
Use the arrow keys to move to the Array Disk column for this disk, and use the + and - keys
to select Yes as the value.
●
When the Keep Data/Erase Disk message appears, press Delete to erase the disk.
●
Use the arrow keys to select the next disk for the IME volume. Select Yes as the value for the
Array Disk column.
If partitions are defined on this disk, a message warns you that data on the disk will be lost
when the mirrored volume is created. Press Delete to confirm erasing data from the disk, or
press any other key to deselect the disk.
●
Repeat the previous steps to select up to four more disks for the IME volume. If you want to
configure a hot spare disk for the volume, you can only select up to three more disks.
ENWW Configuring SAS RAID devices 143

HP xw4600 Specifications

General

Tcase	72.4 °C
Bus type	FSB
Stepping	E0
Processor cache	6 MB
Processor cores	2
Processor model	E8400
System bus rate	- GT/s
Processor family	Intel® Core™2 Duo
Processor series	Intel Core 2 Duo E8000 Series
Processor socket	LGA 775 (Socket T)
Processor codename	Wolfdale
Processing Die size	107 mm²
Processor frequency	3 GHz
Processor cache type	L2
Processor lithography	45 nm
Processor manufacturer	Intel
Processor front side bus	1333 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	65 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	9
Number of Processing Die Transistors	410 M
Audio system	High Definition Audio
Product type	Workstation
Motherboard chipset	Intel® X38 Express
ECC	Yes
Internal memory	2 GB
Memory clock speed	800 MHz
Internal memory type	DDR2-SDRAM
Maximum internal memory	8 GB
Memory layout (slots x size)	2 x 1 GB
HDD speed	7200 RPM
HDD capacity	250 GB
HDD interface	SATA
Optical drive type	DVD-RW
Graphics card	-
Networking features	Gigabit Ethernet (10/100/1000)
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power supply	475 W
Chassis type	Tower
Country of origin	China
Processor code	SLB9J
Processor ARK ID	33910
Processor package size	37.5 x 37.5 mm
On-board graphics card model	Not available

Weight and Dimensions

Depth	456 mm
Width	168 mm
Height	450 mm
Weight	19000 g