Copying a setup configuration to multiple workstations
CAUTION: A setup configuration is model-specific. If source and target workstations are not the same
model, file system corruption can result . For example, do not copy the setup configuration from an HP
xw4200 Workstation to an HP xw4600 Workstation.
This method takes a little longer to prepare the configuration diskette, but copying the configuration to
target workstations is fast.
NOTE: A bootable diskette is required for this procedure. If Windows XP is not available to create a
bootable diskette, use the method for copying to a single workstation instead (see
Copying a setup
configuration to a single workstation on page 36.)
1. Create a bootable diskette.
2. Select a setup configuration to copy.
3. Restart the workstation.
4. As soon as the workstation powers on, press and hold the F10 key until you enter the Computer
Setup (F10) Utility. If necessary, press Enter to bypass the title screen.
NOTE: If you do not press the F10 key at the appropriate time, you must restart the workstation,
and then press and hold the F10 key again to access the utility.
If you are using a PS 2 keyboard, you might see a keyboard error message—disregard it.
5. If you are using a diskette or other storage device, insert it now. If not, proceed to the next step.
6. Select File>Replicated Setup>Save to Removable Media. Follow the instructions on the screen
to create the configuration diskette.
7. Download a BIOS utility for replicating setup (repset.exe) and copy it to the configuration diskette.
To obtain this utility, see
http://www.hp.com/support/files. Enter the model number of the
workstation.
8. On the configuration diskette, create an autoexec.bat file containing repset.exe and
cpqsetup.txt.
9. Power off the workstation you are configuring. Insert the configuration diskette, and then power on
the workstation. The configuration utility runs automatically.
10. Restart the workstation when the configuration is complete.
Updating and managing software
HP provides several tools for managing and updating software on desktops and workstations: HP Client
Manager Software, Altiris Client Management Solutions, System Software Manager, Proactive Change
Notification, and Subscriber’s Choice.
HP Client Manager Software
HP Client Manager Software (HP CMS) assists customers in managing workstation hardware. It offers:
●
Detailed views of hardware inventory for asset management
●
PC health-check monitoring and diagnostics
●
Proactive notification of changes in the hardware environment
ENWW Workstation management 37