HP xw4600 User Manual

Heading Option Description
Slot 5 (PCI) Slot 5 option ROM download (Enable/Disable) and latency timer.
Slot 6 (PCI) Slot 6 option ROM download (Enable/Disable) and latency timer.
Slot 7 (PCI) Slot 7 option ROM download (Enable/Disable) and latency timer.
* Available on selected models.
**These options should be used by advanced users only.
Workstation management
The HP Client Management Solutions (CMS) which are available for download from http://www.hp.com/
go/easydeploy are standards-based solutions for managing and controlling workstations in a networked
environment. This section summarizes capabilities, features, and key components of workstation
management including:
●
Initial workstation configuration and deployment on page 35
●
Installing a remote system on page 36
●
Replicating the setup on page 36
●
Updating and managing software on page 37
●
ROM Flash on page 39
●
FailSafe Boot Block ROM on page 39
●
Asset tracking and security on page 40
●
Fault notification and recovery on page 49
●
Dual-state power button on page 49
NOTE: Support for specific features described in this guide can vary by model and software version.
Initial workstation configuration and deployment
Your workstation includes a preinstalled system software image. After a brief software unbundling
process, the workstation is ready to use.
If you prefer to replace the preinstalled software image with a customized set of system and application
software, several methods are available for deploying a customized software image, including:
●
Installing additional software applications after unbundling the preinstalled software image
●
Using a disk cloning process to copy the contents from one hard drive to another
The best deployment method depends on your information technology environment and processes. The
PC Deployment section of the HP Lifecycle Solutions Web site (
http://www.hp.com/support/HPLS)
provides information to help you select the best deployment method.
The Restore Plus! CD, ROM-based setup, and ACPI hardware provide further assistance with recovery
of system software, configuration management and troubleshooting, and power management.
Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
ENWW Workstation management 35

HP xw4600 Specifications

General

Tcase	72.4 °C
Bus type	FSB
Stepping	E0
Processor cache	6 MB
Processor cores	2
Processor model	E8400
System bus rate	- GT/s
Processor family	Intel® Core™2 Duo
Processor series	Intel Core 2 Duo E8000 Series
Processor socket	LGA 775 (Socket T)
Processor codename	Wolfdale
Processing Die size	107 mm²
Processor frequency	3 GHz
Processor cache type	L2
Processor lithography	45 nm
Processor manufacturer	Intel
Processor front side bus	1333 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	65 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	9
Number of Processing Die Transistors	410 M
Audio system	High Definition Audio
Product type	Workstation
Motherboard chipset	Intel® X38 Express
ECC	Yes
Internal memory	2 GB
Memory clock speed	800 MHz
Internal memory type	DDR2-SDRAM
Maximum internal memory	8 GB
Memory layout (slots x size)	2 x 1 GB
HDD speed	7200 RPM
HDD capacity	250 GB
HDD interface	SATA
Optical drive type	DVD-RW
Graphics card	-
Networking features	Gigabit Ethernet (10/100/1000)
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power supply	475 W
Chassis type	Tower
Country of origin	China
Processor code	SLB9J
Processor ARK ID	33910
Processor package size	37.5 x 37.5 mm
On-board graphics card model	Not available

Weight and Dimensions

Depth	456 mm
Width	168 mm
Height	450 mm
Weight	19000 g