Heading Option Description
finished). The POST delay also gives you more time to select F10 to enter the Computer
Setup (F10) Utility.
●
Limit (CPUID Maximum Value to 3) (Enable/Disable)
Execute
Memory Test
Tests workstation memory. The workstation reboots, and any changes that have been made are
lost. The workstation might boot with memory in a sub optimal configuration.
BIOS Power-On Enables you to disable or specify a weekday and time for BIOS power-on.
Onboard
Devices
Enables you to set resources for or disable onboard system devices such as serial ports, parallel
ports, and diskette controllers. Operating system parameters generally override Onboard Devices
settings.
PCI Devices Enables you to set the IRQ for or disable the following devices during POST:
●
Intel USB controllers
●
Intel HD audio device
●
Intel RAID controller
●
nVidia VGA controller
●
Broadcom Ethernet controller
Operating system parameters generally override PCI Devices settings.
Available IRQ values are 5, 10, and 11.
Bus Options The options are:
●
PCI SERR# Generation (Enable/Disable)
●
PCI VGA Palette Snooping (Enable/Disable)
●
ECC Support (Enable/Disable)
Device Options
●
Printer Mode (EPP + ECP, Output-Only, Bi-Directional)
●
Num Lock State at Power-On (On or Off)
●
S5 Wake-on-LAN (Enable or Disable)
●
Multi-Processor-Turns multi-core function to single-core
●
Internal Speaker (Enable or Disable)
●
Monitor Tracking (Enable or Disable)
●
NIC PxE Option ROM Download (Enable or Disable)
●
SATA RAID Option ROM Download (Enable or Disable)
Slot 1 (PCI
Express x 1)
Slot 1 option ROM download (Enable/Disable)
Slot 2 (PC
Express x16)
Slot 2 option ROM download (Enable/Disable) and latency timer.
Slot 3 (PCI
Express 4)
Slot 3 option ROM download (Enable/Disable).
Slot 4 (PCI
Express x16)
Slot 4 option ROM download (Enable/Disable).
Table 3-1 Computer Setup (F10) Utility menu descriptions (continued)
34 Chapter 3 System management ENWW