HP xw4600 User Manual

Windows Control Panel>Programs and Features. When the application is uninstalled, the
recovery partition is deleted, the user partition is extended to reclaim the unused space, and the
F11 boot prompt is removed. After the application is uninstalled, emergency recovery and data
backup and recovery can no longer be performed.
CAUTION: Deleting the recovery partition or uninstalling the HP Backup and Recovery Manager
application reduces or eliminates the ability to recover the system.
Ordering backup software
If you are unable to create system recovery CDs or DVDs, you can order a recovery disk set from the
HP support center. Before calling HP to order the software, have your workstation serial number
available.
To obtain the support center telephone number for your region:
1. Go to
http://welcome.hp.com/country/us/en/wwcontact_us.html.
2. Select your region.
3. Under the Call HP heading, select Technical support after you buy.
Transferring files and settings using Windows Easy Transfer
Windows Easy Transfer, a Microsoft data migration tool, provides a guide that helps you choose what
files and data to transfer from another Windows computer to your Windows Vista Business workstation
and explains how to transfer it. You can use one of the following interconnect or storage methods with
Windows Easy Transfer to migrate data from another Windows computer to your workstation:
●
Network—can be used when both the source computer and your workstation are connected to the
same network.
●
Easy Transfer cable—a specially designed USB cable that connects the source computer to your
workstation when performing a Windows Easy Transfer. While an Easy Transfer cable is not a
standard USB cable, it is commonly available from local electronics suppliers.
●
DVDs or CDs—can be used if you have writeable DVD or CD drives on the source computer and
your workstation.
●
USB flash drive or an external hard drive—can access both the source computer and your
workstation.
To use the Windows Easy Transfer tool, select Start>All Programs>Accessories>System
Tools>Windows Easy Transfer.
NOTE: For more information about using Windows Easy Transfer with your workstation, see
http://www.microsoft.com/windows/products/windowsvista/features/details/easytransfer.mspx.
Setting up Microsoft Windows XP Professional
This section describes how to configure and restore Microsoft® Windows XP™ Professional on your
workstation.
18 Chapter 2 Configuring and restoring the operating system ENWW

HP xw4600 Specifications

General

Tcase	72.4 °C
Bus type	FSB
Stepping	E0
Processor cache	6 MB
Processor cores	2
Processor model	E8400
System bus rate	- GT/s
Processor family	Intel® Core™2 Duo
Processor series	Intel Core 2 Duo E8000 Series
Processor socket	LGA 775 (Socket T)
Processor codename	Wolfdale
Processing Die size	107 mm²
Processor frequency	3 GHz
Processor cache type	L2
Processor lithography	45 nm
Processor manufacturer	Intel
Processor front side bus	1333 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	65 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	9
Number of Processing Die Transistors	410 M
Audio system	High Definition Audio
Product type	Workstation
Motherboard chipset	Intel® X38 Express
ECC	Yes
Internal memory	2 GB
Memory clock speed	800 MHz
Internal memory type	DDR2-SDRAM
Maximum internal memory	8 GB
Memory layout (slots x size)	2 x 1 GB
HDD speed	7200 RPM
HDD capacity	250 GB
HDD interface	SATA
Optical drive type	DVD-RW
Graphics card	-
Networking features	Gigabit Ethernet (10/100/1000)
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power supply	475 W
Chassis type	Tower
Country of origin	China
Processor code	SLB9J
Processor ARK ID	33910
Processor package size	37.5 x 37.5 mm
On-board graphics card model	Not available

Weight and Dimensions

Depth	456 mm
Width	168 mm
Height	450 mm
Weight	19000 g