HPE FlexNetwork 5510 HI Series

112
Step
Command
Remarks
• Monitor failure times (not supported in
the ICMP jitter, UDP jitter, UDP tracert, or
voice operations):
reaction item-number
checked-element probe-fail
threshold-type { accumulate
accumulate-occurrences | consecutive
consecutive-occurrences } [ action-type
{ none | trap-only } ]
• Monitor the round-trip time (only for the
ICMP jitter, UDP jitter, and voice
operations):
reaction item-number
checked-element rtt threshold-type
{ accumulate accumulate-occurrences |
average } threshold-value
upper-threshold lower-threshold
[ action-type { none | trap-only } ]
• Monitor packet loss (only for the ICMP
jitter, UDP jitter, and voice operations):
reaction item-number
checked-element packet-loss
threshold-type accumulate
accumulate-occurrences [ action-type
{ none | trap-only } ]
• Monitor the one-way jitter (only for the
ICMP jitter, UDP jitter, and voice
operations):
reaction item-number
checked-element { jitter-ds | jitter-sd }
threshold-type { accumulate
accumulate-occurrences | average }
threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only } ]
• Monitor the one-way delay (only for the
ICMP jitter, UDP jitter, and voice
operations):
reaction item-number
checked-element { owd-ds | owd-sd }
threshold-value upper-threshold
lower-threshold
•
Monitor the ICPIF value (only for the
voice operation):
reaction item-number
checked-
element icpif
threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only } ]
•
Monitor the MOS value (only for the
voice operation):
reaction item-number
checked-
element mos
threshold-value upper-threshold
lower-threshold [ action-type { none |
trap-only
} ]