15
Use undo codec-type to restore the default.
Syntax
codec-type { g711a | g711u | g729a }
undo codec-type
Default
The codec type for the voice operation is G.711 A-law.
Views
Voice operation view
Predefined user roles
network-admin
Parameters
g711a: Specifies G.711 A-law codec type.
g711u: Specifies G.711 µ-law codec type
g729a: Specifies G.729 A-law codec type.
Examples
# Set the codec type to g729a for the voice operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type voice
[Sysname-nqa-admin-test-voice] codec-type g729a
data-fill
Use data-fill to configure the payload fill string for probe packets.
Use undo data-fill to restore the default.
Syntax
data-fill string
undo data-fill
Default
The default payload fill string is 0123456789.
Views
ICMP/UDP echo operation view
Path/UDP jitter operation view
Voice operation view
To Next Page
Loading...
Need help?
General
