HPE FlexNetwork MSR3044 User Manual

204
Parameters
port-num: Specifies the UDP port for receiving SNMP packets, in the range of 1 to 65535. The default
is 161.
Usage guidelines
After changing the port number for receiving SNMP packets, reconnect the device by using the port
number for SNMP get and set operations.
To display UDP port information, use the display current-configuration command.
Examples
# Specify the UDP port for receiving SNMP packets as 5555.
<Sysname> system-view
[Sysname] snmp-agent port 5555
# Restore the default UDP port.
<Sysname> system-view
[Sysname] undo snmp-agent port
snmp-agent remote
Use snmp-agent remote to set the SNMP engine ID for a remote SNMP entity.
Use undo snmp-agent remote to delete a remote SNMP engine ID.
Syntax
snmp-agent remote { ipv4-address | ipv6 ipv6-address } [ vpn-instance vpn-instance-name ]
engineid engineid
undo snmp-agent remote ip-address
Default
No remote SNMP engine IDs exist.
Views
System view
Predefined user roles
network-admin
Parameters
ipv4-address: Specifies the IP address of a remote SNMP entity.
ipv6 ipv6-address: Specifies the IPv6 address of a remote SNMP entity.
vpn-instance vpn-instance-name: Specifies the VPN for a remote SNMP entity. The
vpn-instance-name argument specifies the name of the MPLS L3VPN, a case-sensitive string of 1 to
31 characters. If this option is not specified, the remote SNMP entity is in the public network.
engineid: Specifies the SNMP engine ID of the remote SNMP entity. This argument is a hexadecimal
string. Its length is an even number in the range of 10 to 64. All-zero and all-F strings are invalid.

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English