HPE FlexNetwork MSR3044 User Manual

285
Examples
# Specify the contexts for the monitored object as contextname and enable wildcard search for the
contexts.
<Sysname> system-view
[Sysname] snmp mib event trigger owner owner1 name triggerA
[Sysname-trigger-owner1-triggerA] context contextname
[Sysname-trigger-owner1-triggerA] wildcard context
Related commands
context
snmp mib event trigger
wildcard oid (action-set view)
Use wildcard oid to enable wildcard search for the set-action object OIDs.
Use undo wildcard oid to restore the default.
Syntax
wildcard oid
undo wildcard oid
Default
The set-action object OID is fully specified.
Views
Action-set view
Predefined user roles
network-admin
Usage guidelines
This command must be used in conjunction with the oid command. A wildcarded OID has two parts:
the OID specified by the oid command and the wildcarded part.
Examples
# Specify the set-action object by its OID 1.3.6.1.2.1.2.2.1.7 for the event with the owner owner1 and
the name EventA. Enable wildcard search for the sec-action object OIDs.
<Sysname> system-view
[Sysname] snmp mib event owner owner1 name EventA
[Sysname-event-owner1-EventA] action set
[Sysname-event-owner1-EventA-set] oid 1.3.6.1.2.1.2.2.1.7
[Sysname-event-owner1-EventA-set] wildcard oid
Related commands
action set
oid

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English