HPE FlexNetwork MSR3044 User Manual

411
NetStream configuration commands
Commands and descriptions for centralized devices apply to the following routers:
• MSR1002-4/1003-8S.
• MSR2003.
• MSR2004-24/2004-48.
• MSR3012/3024/3044/3064.
• MSR954(JH296A/JH297A/JH298A/JH299A/JH373A).
• MSR958(JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
display ip netstream cache
Use display ip netstream cache to display NetStream entry information.
Syntax
Centralized devices in standalone mode:
display ip netstream cache [ verbose ] [ type { ip | ipl2 | l2 | mpls [ label-position1 label-value1
[ label-position2 label-value2 [ label-position3 label-value3 ] ] ] } ] [ destination destination-ip |
interface interface-type interface-number | source source-ip ] *
Distributed devices in standalone mode/centralized devices in IRF mode:
display ip netstream cache [ verbose ] [ type { ip | ipl2 | l2 | mpls [ label-position1 label-value1
[ label-position2 label-value2 [ label-position3 label-value3 ] ] ] } ] [ destination destination-ip |
interface interface-type interface-number | source source-ip ] * [ slot slot-number ]
Distributed devices in IRF mode:
display ip netstream cache [ verbose ] [ type { ip | ipl2 | l2 | mpls [ label-positio
n1 label-value1
[ label-position2 label-value2 [ label-position3 label-value3 ] ] ] } ] [ destination destination-ip |
interface interface-type interface-number | source source-ip ] * [ chassis chassis-number slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose: Displays detailed information about NetStream entries.

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English