HPE FlexNetwork MSR3044 User Manual

435
Examples
# Enable NetStream for MPLS packets with top label counted but without IP fields.
<Sysname> system-view
[Sysname] ip netstream mpls no-ip-fields
ip netstream timeout active
Use ip netstream timeout active to set the aging timer for active flows.
Use undo ip netstream timeout active to restore the default.
Syntax
ip netstream timeout active minutes
undo ip netstream timeout active
Default
The aging timer is 30 minutes for active flows.
Views
System view
Predefined user roles
network-admin
Parameters
minutes: Sets the aging timer for active flows, in the range of 1 to 60 minutes.
Usage guidelines
A flow is considered active if packets for the NetStream entry arrive before the timer set by this
command expires.
Examples
# Set the aging timer to 60 minutes for active flows.
<Sysname> system-view
[Sysname] ip netstream timeout active 60
Related commands
ip netstream timeout inactive
ip netstream timeout inactive
Use ip netstream timeout inactive to set the aging timer for inactive flows.
Use undo ip netstream timeout inactive to restore the default.
Syntax
ip netstream timeout inactive seconds

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English