58
UDP jitter operation view
Voice operation view
Predefined user roles
network-admin
Parameters
packet-number: Specifies the number of packets to be sent per probe. Available value ranges
include:
• 10 to 1000 for the ICMP jitter, UDP jitter, or path jitter operation.
• 10 to 60000 for the voice operation.
Examples
# Configure the UDP jitter probe to send 100 packets.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type udp-jitter
[Sysname-nqa-admin-test-udp-jitter] probe packet-number 100
probe packet-timeout
Use probe packet-timeout to set the timeout time for waiting for a response in the UDP jitter, path
jitter, or voice operation.
Use undo probe packet-timeout to restore the default.
Syntax
probe packet-timeout timeout
undo probe packet-timeout
Default
The response timeout time in the ICMP jitter, UDP jitter, and path jitter operations is 3000
milliseconds.
The response timeout time in the voice operation is 5000 milliseconds.
Views
ICMP jitter operation view
Path jitter operation view
UDP jitter operation view
Voice operation view
Predefined user roles
network-admin
To Next Page
Loading...
Need help?
General
