299
cwmp acs username
Use cwmp acs username to configure the username for authentication to the preferred ACS URL.
Use undo cwmp acs username to restore the default.
Syntax
cwmp acs username username
undo cwmp acs username
Default
No username is configured for authentication to the preferred ACS URL.
Views
CWMP view
Predefined user roles
network-admin
Parameters
username: Specifies a username, a case-sensitive string of 1 to 255 characters.
Usage guidelines
You can configure only one username for authentication to the preferred ACS URL. If you execute
this command multiple times, the most recent configuration takes effect.
For a successful connection, make sure the CPE has the same username and password settings as
the ACS.
Examples
# Configure the username used for authentication to the preferred ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs username newname
Related commands
cwmp acs password
cwmp cpe connect interface
Use cwmp cpe connect interface to specify the CWMP connection interface.
Use undo cwmp cpe connect interface to restore the default.
Syntax
cwmp cpe connect interface interface-type interface-number
undo cwmp cpe connect interface
To Next Page
Loading...
Need help?
General
