137
PoE commands
This feature is supported only by MSR958(JH301A) and PoE-capable routers installed with the
following modules:
• DSIC-9FSWP.
• HMIM-24GSWP.
• SIC-4FSWP.
PoE-capable routers include the following models:
• MSR3012/3024/3044/3064.
• MSR4060/4080.
Commands and descriptions for centralized devices apply to the following routers:
• MSR958(JH301A).
• MSR3012/3024/3044/3064.
• Commands and descriptions for distributed devices apply to the MSR4060/4080.
The following matrix shows the feature and hardware compatibility:
Hardware PoE compatibility
MSR954(JH296A/JH297A/JH298A/JH299A/JH373A) No
MSR958(JH300A) No
MSR958(JH301A) Yes
MSR1002-4/1003-8S No
MSR2003 No
MSR2004-24/2004-48 No
MSR3012/3024/3044/3064 No
MSR4060/4080 No
apply poe-profile
Use apply poe-profile to apply a PoE profile to a power interface (PI).
Use undo apply poe-profile to restore the default.
Syntax
apply poe-profile { index index | name profile-name }
undo apply poe-profile { index index | name profile-name }
Default
No PoE profile is applied to PIs.