364
Table 71 Command output
Field Description
JID Job ID of a process. It never changes.
PID Number of a process.
%CPU CPU usage in percentage (%).
%MEM Memory usage in percentage (%).
STAT
State of a process:
• R—Running.
• S—Sleeping.
• T—Traced or stopped.
• D—Uninterruptible sleep.
• Z—Zombie.
PRI Priority of a process for scheduling.
TTY TTY used by a process.
HH:MM:SS Running time since the latest start.
COMMAND
Name and parameters of a process. If square brackets ([ ]) exist in a process name,
the process is a kernel thread.
display process cpu
Use display process cpu to display CPU usage for all processes.
Syntax
Centralized devices in standalone mode:
display process cpu
Distributed devices in standalone mode/centralized devices in IRF mode:
display process cpu [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display process cpu [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays CPU usage for all processes on the active MPU. (Distributed devices in standalone mode.)
To Next Page
Loading...
Need help?
General
