HPE FlexNetwork MSR3044 User Manual

205
Usage guidelines
To send informs to an NMS, you must configure the SNMP engine ID of the NMS on the SNMP
agent.
The NMS accepts the SNMPv3 informs from the SNMP agent only if the engine ID in the informs is
the same as its local engine ID.
You can configure a maximum of 20 remote SNMP engine IDs.
Examples
# Set the SNMP engine ID to 123456789A for the remote entity 10.1.1.1.
<Sysname> system-view
[Sysname] snmp-agent remote 10.1.1.1 engineid 123456789A
Related commands
display snmp-agent remote
snmp-agent { inform | trap } source
Use snmp-agent { inform | trap } source to specify a source IP address for the informs or traps sent
by the SNMP agent.
Use undo snmp-agent { inform | trap } source to restore the default.
Syntax
snmp-agent { inform | trap } source interface-type { interface-number |
interface-number.subnumber }
undo snmp-agent { inform | trap } source
Default
The SNMP agent uses the IP address of the outgoing interface as the source IP address of
notifications.
Views
System view
Predefined user roles
network-admin
Parameters
inform: Specifies informs.
trap: Specifies traps.
interface-type { interface-number | interface-number.subnumber }: Specifies an interface by its type
and number. The interface-number argument specifies a main interface number. The subnumber
argument specifies a subinterface number in the range of 1 to 4094.

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English