475
display logbuffer summary
Use display logbuffer summary to display the summary of the log buffer.
Syntax
Centralized devices in standalone mode:
display logbuffer summary [ level severity ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display logbuffer summary [ level severity | slot slot-number ] *
Distributed devices in IRF mode:
display logbuffer summary [ level severity | chassis chassis-number slot slot-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
level severity: Specifies a severity level in the range of 0 to 7. If you do not specify a severity level,
this command displays log information of all levels in the log buffer. For more information about log
levels, see Table 9 0.
slot slot-num
ber: Specifies a card by its slot number. If you do not specify a card, this command
displays information for all cards. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for all member devices. (Centralized devices in IRF
mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The
chassis-number argument represents the member ID of the IRF member device. The slot-number
argument represents the slot number of the card. If you do not specify a card, this command displays
information for all cards. (Distributed devices in IRF mode.)
Examples
# (Centralized devices in standalone mode.) Display the summary of the log buffer.
<Sysname> display logbuffer summary
Slot EMERG ALERT CRIT ERROR WARN NOTIF INFO DEBUG
0 0 0 0 0 22 0 1 0
# (Centralized devices in IRF mode.) Display the summary of the log buffer.
<Sysname> display logbuffer summary
SLOT EMERG ALERT CRIT ERROR WARN NOTIF INFO DEBUG
To Next Page
Loading...
