HPE FlexNetwork MSR3044 User Manual

437
IPv6 NetStream commands
Commands and descriptions for centralized devices apply to the following routers:
• MSR1002-4/1003-8S.
• MSR2003.
• MSR2004-24/2004-48.
• MSR3012/3024/3044/3064.
• MSR954(JH296A/JH297A/JH298A/JH299A/JH373A).
• MSR958(JH300A/JH301A).
Commands and descriptions for distributed devices apply to MSR4060 and MSR4080 routers.
display ipv6 netstream cache
Use display ipv6 netstream cache to display IPv6 NetStream entry information.
Syntax
Centralized devices in standalone mode:
display ipv6 netstream cache [ verbose ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display ipv6 netstream cache [ slot slot-number ] [ verbose ]
Distributed devices in IRF mode:
display ipv6 netstream cache [ chassis chassis-number slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command
displays information about IPv6 NetStream entries for all cards. (Distributed devices in standalone
mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information about IPv6 NetStream entries for all member devices.
(Centralized devices in IRF mode.)

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English