156
Field Description
PoE Current Voltage Current PoE voltage.
PoE Lower Input Threshold AC input under-voltage threshold.
PoE Upper Input Threshold AC input over-voltage threshold.
PoE Lower Output Threshold DC output under-voltage threshold.
PoE Upper Output Threshold DC output over-voltage threshold.
PoE Hardware Version PoE hardware version number.
PoE Software Version PoE software version number.
PoE Power Supplies Number of PoE power supply units.
Manufacturer
Manufacturer of the PoE power. This field displays
NONE
if the device
cannot obtain manufacturer information.
Type
Type of the PoE power. This field displays
NONE
if the device cannot
obtain type information.
Status
PoE power status:
• Normal—The PoE power supply is operating correctly.
• Absent—The PoE power supply is not present.
• Off—The PoE power is turned off.
• Active—The active PoE power supply is operating correctly.
• Standby—The standby PoE power supply is operating correctly.
• Balanced—The PoE power supply is operating in load balancing
mode.
• Redundant—The PoE power supply is operating in redundancy
mode.
• Alarm—An alarm was triggered.
• Faulty—A fault occurred.
display poe-profile
Use display poe-profile to display information about the PoE profile.
Syntax
display poe-profile [ index index | name profile-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
index index: Specifies a PoE profile by its index number in the range of 1 to 100.
name profile-name: Specifies a PoE profile by its name, a case-sensitive string of 1 to 15 characters.
To Next Page
Loading...
Need help?
General
