HPE FlexNetwork MSR3044 User Manual

461
sFlow commands
sFlow is not supported on Layer 2 Ethernet interfaces and Layer-configurable Ethernet interfaces.
The following matrix shows the feature and hardware compatibility:
Hardware sFlow compatibility
MSR954(JH296A/JH297A/JH298A/JH299A/JH373A) No
MSR958(JH300A/JH301A) No
MSR1002-4/1003-8S Yes
MSR2003 Yes
MSR2004-24/2004-48
Yes on GigabitEthernet 0/0
No on GigabitEthernet 0/1 and GigabitEthernet 0/2
MSR3012/3024/3044/3064 Yes
MSR4060/4080
No on the management Ethernet interfaces of the
MPUs
Yes on Ethernet interfaces of the SPUs
display sflow
Use display sflow to display sFlow configuration and operation information.
Syntax
display sflow
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display sFlow configuration and operation information.
<Sysname> display sflow
sFlow datagram version: 5
Global information:
Agent IP: 10.10.10.1(CLI)
Source address: 10.0.0.1 2001::1
Collector information:
ID IP Port Aging Size VPN-instance Description
1 22:2:20::10 6535 N/A 1400 vpn1 netserver
2 192.168.3.5 6543 500 1400 Office
Port information:

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English