HPE FlexNetwork MSR3044 User Manual

182
View Type: excluded
View status: active
ViewDefault is the default MIB view. The output shows that except for the MIB objects in the
snmpUsmMIB, snmpVacmMIB, and snmpModules.18 subtrees, all the MIB objects in the iso
subtree are accessible.
Table 38 Command output
Field Description
View name MIB view name.
MIB Subtree MIB subtree covered by the MIB view.
Subtree mask MIB subtree mask.
Storage-type
Type of the medium (see
Table 31
)
where the subtree view is stored.
View Type
Access privilege for the MIB subtree in the MIB view:
• Included—All objects in the MIB subtree are accessible in the MIB view.
• Excluded—None of the objects in the MIB subtree is accessible in the MIB view.
View status
Status of the MIB view:
• active—MIB view is effective.
• inactive—MIB view is ineffective.
MIB views are active upon their creation at the CLI. To temporarily disable a MIB view
without deleting it, you can perform an SNMP set operation to set its status to inactive.
Related commands
snmp-agent mib-view
display snmp-agent remote
Use display snmp-agent remote to display remote SNMP engine IDs configured by using the
snmp-agent remote command.
Syntax
display snmp-agent remote [ { ipv4-address | ipv6 ipv6-address } [ vpn-instance
vpn-instance-name ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
ipv4-address: Specifies the IPv4 address of a remote SNMP entity to display its SNMP engine ID.
ipv6 ipv6-address: Specifies the IPv6 address of a remote SNMP entity to display its SNMP engine
ID.

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English