43
Default
The history records of an NQA operation are kept for 120 minutes.
Views
DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view
ICMP/UDP echo operation view
UDP tracert operation view
Predefined user roles
network-admin
Parameters
keep-time: Specifies how long the history records can be saved. The value range is 1 to 1440
minutes.
Usage guidelines
When an NQA operation completes, the timer starts. All records are removed when the lifetime is
reached.
Examples
# Set the lifetime of the history records to 100 minutes for the ICMP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] history-record keep-time 100
history-record number
Use history-record number to set the maximum number of history records that can be saved for an
NQA operation.
Use undo history-record number to restore the default.
Syntax
history-record number number
undo history-record number
Default
A maximum of 50 history records can be saved for an NQA operation.
Views
DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP operation view
ICMP/UDP echo operation view
UDP tracert operation view
To Next Page
Loading...
Need help?
General
