HPE FlexNetwork MSR3044 User Manual

448
Views
IPv6 NetStream aggregation mode view
Predefined user roles
network-admin
Examples
# Enable IPv6 NetStream AS aggregation mode.
<Sysname> system-view
[Sysname] ipv6 netstream aggregation as
[Sysname-ns6-aggregation-as] enable
Related commands
ipv6 netstream aggregation
ipv6 netstream
Use ipv6 netstream to enable IPv6 NetStream on an interface.
Use undo ipv6 netstream to disable IPv6 NetStream on an interface.
Syntax
ipv6 netstream [ inbound | outbound ]
undo ipv6 netstream [ inbound | outbound ]
Default
IPv6 NetStream is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
inbound: Enables IPv6 NetStream for incoming traffic.
outbound: Enables IPv6 NetStream for outgoing traffic.
Examples
# Enable IPv6 NetStream for incoming traffic on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] ipv6 netstream inbound
ipv6 netstream filter
Use ipv6 netstream filter to enable IPv6 NetStream filtering on an interface.

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English