31
Field Description
DS lost packets Number of lost packets from the destination to the source.
Lost packets for unknown reason Number of lost packets for unknown reasons.
Voice scores
Voice parameters.
This field is available only for the voice operation.
MOS value MOS value calculated for the voice operation.
ICPIF value ICPIF value calculated for the voice operation.
Hop IP
IP address of the hop.
This field is available only for the path jitter operation.
Path-jitter results
Path jitter operation results.
This field is available only for the path jitter operation.
Jitter number
Number of jitters.
This field is available only for the path jitter operation.
Min/Max/Average jitter
Minimum/maximum/average jitter in milliseconds.
This field is available only for the path jitter operation.
Positive jitter number
Number of positive jitter.
This field is available only for the path jitter operation.
Min/Max/Average positive jitter
Minimum/maximum/average positive jitter in milliseconds.
This field is available only for the path jitter operation.
Sum/Square-Sum positive jitter
Sum/square sum of the positive jitter.
This field is available only for the path jitter operation.
Negative jitter number
Number of negative jitter.
This field is available only for the path jitter operation.
Min/Max/Average negative jitter
Minimum/maximum/average negative jitter in milliseconds.
This field is available only for the path jitter operation.
Sum/Square-Sum negative jitter
Sum/square sum of the negative jitter.
This field is available only for the path jitter operation.
TTL TTL value in the received reply packet.
Hop IP IP address of the node that sent the reply packet.
Time Time when the NQA client received the reply packet.
display nqa statistics
Use display nqa statistics to display NQA operation statistics.
Syntax
display nqa statistics [ admin-name operation-tag ]
Views
Any view
To Next Page
Loading...
Need help?
General
