88
NQA server status: Enabled
TCP connect:
IP Address Port ToS Vpn-instance
2.2.2.2 2000 200 -
UDP echo:
IP Address Port ToS Vpn-instance
3.3.3.3 3000 255 vpn1
Table 12 Command output
Field Description
NQA server status Whether the NQA server is enabled.
TCP connect Information about the TCP listening service on the NQA server.
UDP echo Information about the UDP listening service on the NQA server.
IP Address IP address specified for the TCP/UDP listening service on the NQA server.
Port Port number specified for the TCP/UDP listening service on the NQA server.
ToS ToS value in reply packets sent by the NQA server.
Vpn-instance
Name of the VPN instance to which the IP address that the NQA server
listens on belongs. This field displays a hyphen (-) if the NQA server listens
on a public IP address.
Related commands
nqa server enable
nqa server tcp-connect
nqa server udp-echo
nqa server enable
Use nqa server enable to enable the NQA server.
Use undo nqa server enable to disable the NQA server.
Syntax
nqa server enable
undo nqa server enable
Default
The NQA server is disabled.
Views
System view
Predefined user roles
network-admin
To Next Page
Loading...
