HPE FlexNetwork MSR3044 User Manual

187
Usage guidelines
You can use the snmp-agent trap enable command to enable or disable the notification function of
a module. For a module that has sub-modules, the notification function status is enable if the trap
function of any of its sub-modules is enabled.
Examples
# Display the modules that can generate notification and their notification function status.
arp notification is disabled.
configuration notification is enabled.
l3vpn notification is enabled.
mac-address notification is enabled.
mpls notification is disabled.
ospfv3 notification is enabled.
radius notification is disabled.
standard notification is enabled.
stp notification is disabled.
syslog notification is disabled.
system notification is enabled.
Enabled notifications: 6; Disabled notifications: 5
Related commands
snmp-agent trap enable
display snmp-agent usm-user
Use display snmp-agent usm-user to display SNMPv3 user information.
Syntax
display snmp-agent usm-user [ engineid engineid | group group-name | username user-name ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
engineid engineid: Displays SNMPv3 user information for the SNMP engine ID identified by
engineid. When an SNMPv3 user is created, the system records the local SNMP entity engine ID.
The user becomes invalid when the engine ID changes, and it becomes valid again when the
recorded engine ID is restored.
group group-name: Displays SNMPv3 user information for a specified SNMP group name. The
group name is case sensitive.

HPE FlexNetwork MSR3044 Specifications

General

Brand	HPE
Model	FlexNetwork MSR3044
Category	Network Router
Language	English