HPE FlexNetwork MSR3044

395
reset kernel deadloop
Use reset kernel deadloop to clear kernel thread deadloop information.
Syntax
Centralized devices in standalone mode:
reset kernel deadloop
Distributed devices in standalone mode/centralized devices in IRF mode:
reset kernel deadloop [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
reset kernel deadloop [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
Views
User view
Predefined user roles
network-admin
Parameters
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the
command clears kernel thread deadloop information for the active MPU. (Distributed devices in
standalone mode.)
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
command clears kernel thread deadloop information for the master device. (Centralized devices in
IRF mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do
not specify this option, the command clears kernel thread deadloop information for the global active
MPU. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Centralized devices in IRF mode/distributed
devices in IRF or standalone mode.)
Examples
# Clear kernel thread deadloop information.
<Sysname> reset kernel deadloop
Related commands
display kernel deadloop
reset kernel exception
Use reset kernel exception to clear kernel thread exception information.