369
Field Description
Stack Stack memory used by the user process, in KB. The value for a kernel thread is 0.
Dynamic Dynamic memory used by the user process, in KB. The value for a kernel thread is 0.
Name
Name of the user process. If square brackets ([ ]) exist in a process name, the process is
a kernel thread.
Related commands
display process memory heap
display process memory heap address
display process memory heap size
display process memory heap
Use display process memory heap to display heap memory usage for a user process.
Syntax
Centralized devices in standalone mode:
display process memory heap job job-id [ verbose ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display process memory heap job job-id [ verbose ] [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display process memory heap job job-id [ verbose ] [ chassis chassis-number slot slot-number
[ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
job job-id: Specifies a user process by its job ID, in the range of 1 to 2147483647.
verbose: Displays detailed information. If you do not specify this keyword, the command displays
brief information.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays heap memory usage for the user process on the active MPU. (Distributed devices in
standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for the master device. (Centralized devices in IRF mode.)
To Next Page
Loading...
Need help?
General
