201
Parameters
all: Enables logging SNMP authentication failures, Get operations, and Set operations.
authfail: Enables logging SNMP authentication failures.
get-operation: Enables logging SNMP Get operations.
set-operation: Enables logging SNMP Set operations.
Usage guidelines
Use SNMP logging to record the SNMP operations performed on the SNMP agent or authentication
failures from the NMS to the agent for auditing NMS behaviors. The SNMP agent sends log data to
the information center. You can configure the information center to output the data to a destination as
needed.
Examples
# Enable logging SNMP Get operations.
<Sysname> system-view
[Sysname] snmp-agent log get-operation
# Enable logging SNMP Set operations.
<Sysname> system-view
[Sysname] snmp-agent log set-operation
# Enable logging SNMP authentication failures.
<Sysname> system-view
[Sysname] snmp-agent log authfail
snmp-agent mib-view
Use snmp-agent mib-view to create or update a MIB view.
Use undo snmp-agent mib-view to delete a MIB view.
Syntax
snmp-agent mib-view { excluded | included } view-name oid-tree [ mask mask-value ]
undo snmp-agent mib-view view-name
Default
The system creates the ViewDefault view when the SNMP agent is enabled. In this default MIB view,
all MIB objects in the iso subtree but the snmpUsmMIB, snmpVacmMIB, and snmpModules.18
subtrees are accessible.
Views
System view
Predefined user roles
network-admin