167
Syntax
poe update { full | refresh } filename [ pse pse-id ]
Views
System view
Predefined user roles
network-admin
Parameters
full: Upgrades the PSE firmware in full mode.
refresh: Upgrades the PSE firmware in refresh mode.
filename: Specifies the name of the upgrade file, a case-insensitive string of 1 to 64 characters. The
specified file must be in the root directory of the file system of the device.
pse pse-id: Specifies a PSE by its ID. If you do not specify a PSE, all PSEs are upgraded.
Usage guidelines
You can upgrade the PSE firmware in service in either of the following modes:
• Refresh mode—Updates the PSE firmware without deleting it. You can use the refresh mode
in most cases.
• Full mode—Deletes the current PSE firmware and reloads a new one. Use the full mode if the
PSE firmware is damaged and you cannot execute any PoE commands.
Examples
# Upgrade the firmware of PSE 7 in service.
<Sysname> system-view
[Sysname] poe update refresh POE-168.bin pse 7
poe-profile
Use poe-profile to create a PoE profile and enter its view, or enter the view of an existing PoE
profile.
Use undo poe-profile to delete a PoE profile.
Syntax
poe-profile profile-name [ index ]
undo poe-profile { index index | name profile-name }
Default
No PoE profiles exist.
Views
System view
To Next Page
Loading...
Need help?
General
