130
display sntp sessions
Use display sntp sessionsto display information about all IPv4SNTP associations.
Syntax
display sntp sessions
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information aboutall IPv4SNTP associations.
<Sysname>display sntp sessions
SNTP server Stratum Version Last receive time
1.0.1.112 4 Tue, May 17 2011 9:11:20.833 (Synced)
Table 20 Command output
Field Description
SNTP server
SNTP server (NTP server). If this field displays
0.0.0.0
, the IP address of the NTP
server has not been resolved successfully.
Stratum
Stratum level of the NTP server, which determines the clock accuracy. It is in the
range of 1 to 16. A lower stratum level represents higher clock accuracy. A clock
with stratum level 16 is not synchronized.
Version SNTP version.
Last receive time
Time when the last message was received. Synced means the local clock is
synchronized to the NTP server.
sntp authentication enable
Use sntp authentication enableto enable SNTP authentication.
Use undo sntp authentication enableto disable SNTP authentication.
Syntax
sntp authentication enable
undo sntp authentication enable
Default
SNTP authentication is disabled.
Views
System view
To Next Page
Loading...
Need help?
General
