506
terminal monitor
Use terminal monitor to enable the monitoring of logs on the current terminal.
Use undo terminal monitor to disable the monitoring of logs on the current terminal.
Syntax
terminal monitor
undo terminal monitor
Default
Monitoring of logs is enabled on the console and disabled on the monitor terminal.
Views
User view
Predefined user roles
network-admin
Usage guidelines
This command takes effect only for the current connection between the terminal and the device. If a
new connection is established, the default is restored.
Examples
# Enable the monitoring of logs on the current terminal.
<Sysname> terminal monitor
The current terminal is enabled to display logs.
To Next Page
Loading...
Need help?
General
