284
Views
Action-set view
Predefined user roles
network-admin
Usage guidelines
This command must be used in conjunction with the context command. A wildcarded context has
two parts: the context specified by the context command and the wildcarded part.
Examples
# Specify the context for the set-action object as contextname1 and enable wildcard search for the
contexts.
<Sysname> system-view
[Sysname] snmp mib event owner owner1 name EventA
[Sysname-event-owner1-EventA] action set
[Sysname-event-owner1-EventA-set] context contextname1
[Sysname-event-owner1-EventA-set] wildcard context
Related commands
action set
context
snmp mib event owner
wildcard context (trigger view)
Use wildcard context to enable wildcard search for the contexts of a monitored object.
Use undo wildcard context to restore the default.
Syntax
wildcard context
undo wildcard context
Default
The context of an object is fully specified.
Views
Trigger view
Predefined user roles
network-admin
Usage guidelines
This command must be used with the context command. A wildcarded context has two parts: the
context specified by the context command and the wildcarded part.
To Next Page
Loading...
Need help?
General
