18
description
Use description to configure a description for an NQA operation, such as the operation type or
purpose.
Use undo description to restore the default.
Syntax
description text
undo description
Default
No description is configured for an NQA operation.
Views
DHCP/DLSw/DNS/FTP/HTTP/SNMP/TCP/voice operation view
ICMP/UDP echo operation view
ICMP/path/UDP jitter operation view
UDP tracert operation view
Predefined user roles
network-admin
Parameters
text: Specifies a description, a case-sensitive string of 1 to 200 characters.
Examples
# Configure the description as icmp-probe for the ICMP echo operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] description icmp-probe
destination ip
Use destination ip to configure the destination IPv4 address for the operation.
Use undo destination ip to restore the default.
Syntax
destination ip ip-address
undo destination ip
Default
No destination IPv4 address is configured for an operation.
To Next Page
Loading...
Need help?
General
