353
Function Address = 0x8016ce0c
Function Address = 0x801223a0
Instruction dump:
41a2fe9c 812300ec 800200ec 7f890000 409efe8c 80010014 540b07b9 40a2fe80
4bfffe6c 80780290 7f64db78 4804ea35 <807f002c> 38800000 38a00080 3863000c
For detailed information about the command output, see Ta bl e 66 .
Related commands
reset kernel exception
display kernel reboot
Use display kernel reboot to display kernel thread reboot information.
Syntax
Centralized devices in standalone mode:
display kernel reboot show-number [ offset ] [ verbose ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display kernel reboot show-number [ offset ] [ verbose ] [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
display kernel reboot show-number [ offset ] [ verbose ] [ chassis chassis-number slot
slot-number [ cpu cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
show-number: Specifies the number of kernel thread reboots to display, in the range of 1 to 10.
offset: Specifies the offset between the starting reboot and the latest reboot, in the range of 0 to 9.
The default value is 0.
verbose: Displays detailed information. If you do not specify this keyword, the command displays
brief information.
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the
command displays kernel thread reboot information for the active MPU. (Distributed devices in
standalone mode.)
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the
command displays kernel thread reboot information for the master device. (Centralized devices in
IRF mode.)
To Next Page
Loading...
Need help?
General
